|
|
|
|
|
|
6258 CrampBuster Cruise Assist (Oversized) (Each)
|
List Price: $10.99
Our Price: $8.99
You save $2.00!
|
|
|
The CrampBuster provides a way for comfortable throttle control & dramatically reduces the wrist fatigue often caused by long rides.. When downward pressure is applied by your hand, the throttle is regulated effortlessly & accurately without squeezing. No tools are required for installation. Just spring it open, and slip it on.
Fits: Motorcycles with 1" Bars
|
|
|
|
|
|
|
|
|
|
6255 Throttle Rocker™ (Right) (Each)
|
List Price: $10.99
Our Price: $8.99
You save $2.00!
|
|
|
The Throttle Rocker attaches to the grip with a Velcro strap & allows you to maintain a steady cruising speed without keeping a tight grip on the throttle.
Fits:Any application with a twist grip throttle.
|
|
|
|
|
|
|
|
|
|
6254 CrampBuster Cruise Assist (Oversized) (Each)
|
List Price: $10.99
Our Price: $8.99
You save $2.00!
|
|
|
The CrampBuster provides a way for comfortable throttle control & dramatically reduces the wrist fatigue often caused by long rides.. When downward pressure is applied by your hand, the throttle is regulated effortlessly & accurately without squeezing. No tools are required for installation. Just spring it open, and slip it on.
Fits: Motorcycles with H-D & 1" Bars
|
|
|
|
|
|
|
|
|
|
6257 CrampBuster Cruise Assist (Wide) (Each)
|
List Price: $10.99
Our Price: $8.99
You save $2.00!
|
|
|
The CrampBuster provides a way for comfortable throttle control & dramatically reduces the wrist fatigue often caused by long rides.. When downward pressure is applied by your hand, the throttle is regulated effortlessly & accurately without squeezing. No tools are required for installation. Just spring it open, and slip it on.
Fits: Motorcycles with 7/8" Bars
|
|
|
|
|
|
|
|
|
|
6256 Throttle Rocker™ (Left) (Each)
|
List Price: $10.99
Our Price: $8.99
You save $2.00!
|
|
|
The Throttle Rocker attaches to the grip with a Velcro strap & allows you to maintain a steady cruising speed without keeping a tight grip on the throttle.
Fits:Any application with a twist grip throttle.
|
|
|
|
|
|
|
|
|
|
6268 - Thumbnail Turn Signal Button Extension, Chrome (pr)
|
List Price: $16.99
Our Price: $14.99
You save $2.00!
|
|
|
• Makes turn signal actuation simple for riders with small hands – even while manipulating clutch or brake controls.
• Available in chrome or black
• Simple peel-and-stick installation
Fits: All '96-'09 H-D Models Note: Not compatible with Küryakyn Switch Housing Covers (P/N's 7809, 7827, 7828)
|
|
|
|
|
|
|
|
|
|
9001 - Chrome Reflector Covers (pr)
|
List Price: $19.99
Our Price: $17.99
You save $2.00!
|
|
|
Finished in traditional lustrous Küryakyn chrome, these louvered chrome covers will stylize those unsightly front and rear reflectors while heightening visibility. P/N 9001
Fits: Front: All VTX 1800, all 750 Spirit, all Shadow VLX 600 Front And Rear: All 1100 Spirit Other Motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance around the reflector.
|
|
|
|
|
|
|
|
|
|
9017 Rear Fender Trim for GL1800
|
List Price: $29.99
Our Price: $26.99
You save $3.00!
|
|
|
This handsome trim strip is a natural complement to the Debris Modulator Mud Flap & our trick Lighted Molding. It installs easily on the bottom edge of the rear fender & provides a classy finishing touch.
Fits: All '01-'09 GL1800 Models
|
|
|
|
|
|
|
|
|
|
6247 - KewLock Grip End Helmet Lock - (Each)
|
List Price: $39.99
Our Price: $35.99
You save $4.00!
|
|
|
Add the KewLock to your ISO™-Grips or ISO™-Flame Grips and have a convenient and safe place to put your helmet when you leave your bike. This trick little device adds both a locking helmet holder to the end of your grips as well as functions as a bar end weight to assist in stabilizing. Simply slide your helmet D Ring into the slot or use the provided helmet lock extension and lock it in.
Fits: Küryakyn ISO-Grips or ISO-Flame Grips.
|
|
|
|
|
|
|
|
|
|
2027 - Chrome Throttle and Idle Cable covers (set)
|
List Price: $39.99
Our Price: $35.99
You save $4.00!
|
|
|
You've chromed your switch housings and controls, installed custom mirrors and grips, now it's time to finish the job with our Chrome Throttle and Idle Cable Covers. We offer a quick and easy way to cover the zinc plated metal elbows found on your stock cables. Installation only takes a couple of minutes and requires no disassembly of your controls or cables; the two-piece covers are held together by c-clips.
Fits: All '82-'08 Models with 90 Degree Cable Elbows.
|
|
|
|
