|
BCD279-UN-HO Universal Motorcycle Headset for Open Face/Flip-front/Full Face Style Helmets
|
|
CB Antenna Shaft ONLY for License Plate Mount CB Antennas in 1', 2' or 3'
|
|
|
|
|
|
|
This new performance series helmet headset from J&M has been designed to be installed into most open face, flip-front and full-coverage style helmets. It features our AeroMike® III miniature boom microphone, two of our wide-fidelity ultra-slim helmet speakers in stereo, our universal clamp-on mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.
|
TUNED FIBERGLASS CB ANTENNA . THIS ANTENNA IS PRE-TUNED FOR YOUR JMCB-2003 CB RADIO.
Actual lengths are:
1' = 15"
2' = 24"
3' = 36"
|
|
|
|
CB-ANT-GL15 CB Antenna Kit for Honda GL-1500
|
|
CB-Antenna-GL18 CB Antenna for a GL1800
|
|
|
|
|
|
|
This antenna attaches to the GL1500 trunk just like the stock Honda CB antenna. Features: folds down, designed not to wobble, angle adjustment stop and includes a ground strap and mounting hardware. Looks EXACTLY like the Stock Honda Antenna.
CB Antenna Kit for Honda GL-1500 Looks and mounts just like the stock Honda antenna.
|
This antenna attaches to the GL1800 trunk just like the stock Honda CB antenna. Features: folds down, designed not to wobble, angle adjustment stop and includes a ground strap and mounting hardware. Looks EXACTLY like the Stock Honda Antenna.
CB Antenna Kit for Honda GL-1800 Looks and mounts just like the stock Honda antenna.
|
|
|
|
CFBR-GL1800 J&M Bluetooth Cell-Phone/GPS/Radar-beep Integration for Honda GL-1800
|
|
CFBR-HRUC J&M Bluetooth Cell-Phone/GPS/Radar Integration 1998-Now Harley Ultra
|
|
|
|
|
|
|
NEW! J&M Product for GL1800 Goldwings
This custom made J&M Bluetooth integration terminal will integrate a Cell-Phone, Smart-Phone, Bluetooth enabled
GPS unit and/or specific Radar-Detectors with the driver's (only) J&M or Honda brand corded helmet headset.. While using the normal audio system functions on the GL-1800 of music, intercom and/or CB radio, if the cell phone receives an incoming call and the call is accepted by depressing the handlebar mounted multifunction button, (or onscreen thru a Garmin Zumo) complete connection of the driver's headset to the cell phone is automatically initiated for totally hands-free operation.
Voice-command-dialing can be activated by depressing the handlebar mounted multifunction button, which will also initiate complete connection of the driver's headset to the cell phone, for totally hands-free operation. If the Bluetooth enabled and linked GPS unit emits any navigation commands, or the radar detector emits any beeps or braps, regardless of what else might be being heard in the headset, they will momentarily be heard in the driver’s corded helmet headset.
Once linked the first time, the Bluetooth enabled cell-phone will automatically connect/disconnect from the system, when the GL-1800 ignition is turned on or off. Additional linking/use scenarios are outlined in the installation/operation manual .pdf download listed below.
This is a totally plug-n-play Bluetooth cell-phone integration solution for all years of the Honda GL-1800, including the new 2012 model. Kit includes the plug-in integration module, handlebar-mounted control switch assembly and complete installation/operation manual.
|
This custom made J&M Bluetooth integration terminal will integrate a Cell-Phone, Smart-Phone, Bluetooth enabled GPS unit and/or specific Radar-Detectors with the driver's (only) J&M or Harley-Davidson brand corded helmet headset. While using the normal audio system functions on the Harley Ultra of stereo music, intercom and/or CB radio, if the cell phone receives an incoming call and the call is accepted by depressing the handlebar mounted multifunction button, (or onscreen thru a Garmin Zumo) complete connection of the driver's headset to the cell phone is automatically initiated for totally hands-free operation. Voice-command-dialing can be activated by depressing the handlebar mounted multifunction button, which will also initiate complete connection of the driver's headset to the cell phone, for totally hands-free operation. If the Bluetooth enabled and linked GPS unit emits any navigation commands, or the radar detector emits any beeps or braps, regardless of what else might be being heard in the headset, they will momentarily be heard in the driver’s corded helmet headset.
Once linked the first time, the Bluetooth enabled cell-phone will automatically connect/disconnect from the system, when the Harley Ultra ignition is turned on or off. Additional linking/use scenarios are outlined in the installation/operation manual .pdf download listed below. This is a totally plug-n-play Bluetooth cell-phone integration solution for 1998-2012 Harley, including the new RoadGlide Ultra model.
Kit includes the plug-in integration module, handlebar-mounted control switch assembly and complete installation/operation manual.
Note: Specific radar-detector adapter harnesses are available at extra cost.
|
|
|
|
CFRG-D-CA01 Cell Phone (only) Adapter Harness for JCB03-CFRG-D Terminal
|
|
FGA-345 Automotive Type or Harley Radio Adapter for JMCB-2003 Motorcycle CB System
|
|
|
|
|
|
|
This cell phone adapter harness for the JCB03-CFRG-D integration terminal features the 2.5mm 3-conuctor plug for standard cell phones jacks, along with the 3.5mm 4-conductor plug for Blackberry/I-phone, and other cell phones utilizing the 3.5mm 4-conductor jack.
|
This Harley radio adapter has been designed to connect an automotive-type or factory installed Harley radio to the JMCB-2003 Motorcycle CB System handlebar audio system’s AUX input. This kit will allow you to hear your CB radio and Stereo Radio thru the headsets AND the fairing speakers. This adapter kit includes heavy duty cable, mounting hardware and all connection instructions.
|
|
|
|
FGA-345-HD Harley® Radio Adapter for JMCB-2003 W/Fairing Speaker On/Off Switch Wiring Harness
|
|
FPA-HCCB FLEXPOWER™ CB Antenna 2006-Now Harley Classic or Roadglide Fairing w/Harley® CB Radio
|
|
|
|
|
|
This adapter has been designed to connect a factory installed Harley radio to the JMCB-2003 handlebar audio system’s AUX input & provide at the same time a plug-n-play wiring harness, with fairing speaker on/off switch included as part of it’s design. This kit will allow you to hear your CB radio and Stereo Radio thru the headsets AND the fairing speakers or just thru the Headsets.
This adapter kit includes heavy duty cable, plug-n-play harness, on/off switch, & mounting hardware.
|
J&M’s new FLEXPOWER™ hide-a-way CB antenna is THE BEST hide-a-way CB antenna on the market today, and will nearly equal the performance of your rear mounted CB antenna, to help you eliminate altogether the rear mounted CB antenna on your Harley®.
This will work on 2006-Now Electra Glides and Road Glides with the Harley Davidson CB radio.
|
|
|
|
FPA-HJCB FLEXPOWER™ CB Antenna for Harley Classic or Roadglide Fairing from 1989-2005 with Harley CB and 1989-Now with J&M® JMCB-2003B CB Radio
|
|
GPS Mic Interface for GL1800/1500
|
|
|
|
|
|
|
J&M’s new FLEXPOWER™ hide-a-way CB antenna is THE BEST hide-a-way CB antenna on the market today, and will nearly equal the performance of your rear mounted CB antenna, to help you eliminate altogether the rear mounted CB antenna on your Harley®.
This will work on 1989-2005 Electra Glides and Road Glides with the Harley Davidson CB radio and also
1989-2012 Electra Glides and Road Glides with the JMCB-2203 J&M radio.
|
Do want to use your smart phone while riding? If you have a Garmin GPS and a smart phone, all you need is this interface. Attach this microphone interface to your headset connector and you will soon be able to use the voice commands and/or Bluetooth phone capabilities (if present) of your GPS. Works on both 1500 and 1800 models (A compatible Bluetooth capable cell phone and GPS are required)
This is really an easy system. Pair your smart phone to your Garmin GPS, plug your GPS in to the auxiliary on your Goldwing. You will hear calls incoming in your headset and answer, refuse, dial, etc using voice command through the mic on your headset.
Installation is plug and play under the lefthand fairing pocket, unit is level matched and gives complete isolation from the bike's intercom system to avoid any noise issues.
Should also work with other devices requiring a 2. 5mm microphone input. Standard microphone cable length is approximately 6 feet to allow for routing to most locations with a right angled connector. Please consult your GPS user guide to make sure your unit has the correct connections present either on the unit or its cradle some models require extra parts to allow a microphone input
Care must be taken when routing the cables for this item as it is very easy to pickup alternator noise if you run in close proximity to some other cables , we make this unit with screened cable to try to avoid any interference but care must still be taken when locating.. This item only provides a microphone feed to your GPS it does not provide audio into your radio
If you intend to use this item with your GPS as a Bluetooth phone interface please check the compatibility of your phone to your GPS before ordering, we do not offer refunds due to Bluetooth mismatches between your GPS and cell phone
Click HereTo Go To The Garmin Website To Check Bluetooth Phone And GPS Compatibility
Attention 660 and 665 owners use of this item can be hit and miss on these two models due to variations in the Garmin units although no damage will occur by using this interface speech levels over Bluetooth may be greatly reduced this is not a fault with the splitter as some 66X unit require a very high level headset microphone please be aware of this before you order.
|
|
|
|
HACC-GL18 Intercom Wind Noise and RF Filter for the Honda GL-1800 Audio System
|
|
HBK01 JMCB-2003 Mounting Bracket kit (only) for Honda Valkyrie/St-1300/1100
|
|
|
|
|
|
|
This is a passive electronic low frequency wind noise filter for the passenger position on the Honda GL-1800. In addition to reducing the actual wind noise that is heard thru the intercom system, this filter also helps the music mute sensitivity circuit to work better, making it easier to find a control position where the wind and background noise will not mute the music but voice frequencies will.
Installation is a snap as this filter plugs in series with the passengers headset lead under the back of the seat.
|
JMCB-2003 Mounting Bracket kit (only) for Honda Valkyrie/St-1300/1100 is Black Powder Coated.
The JCB03-HBK01P is a Polished Stainless-steel that fits most other Honda Cruisers.
Please choose these based on your particular bike.
|
|
|
|
HBK02 JMCB-2003 Mount Bracket kit (only) for Harley w/1" or 1 ¼” Handlebars
|
|
HBK03 JMCB-2003 Mounting Bracket Kit (only) for Yamaha Cruisers
|
|
|
|
|
|
|
JMCB-2003 Mount Bracket kit (only) for Harley w/1" or 1 ¼” Handlebars
|
JMCB-2003 Mounting Bracket Kit (only) for Yamaha Cruisers
|
|
|
|
HBK03S JMCB-2003 Polished Mounting Bracket (only) Yamaha Stratoliner
|
|
HBK04 JMCB-2003 Mounting Bracket Kit (only) for most Suzuki Cruisers
|
|
|
|
|
|
|
JMCB-2003 Polished Mounting Bracket (only) Yamaha Stratoliner
|
JMCB-2003 Mounting Bracket Kit (only) for most Suzuki Cruisers
|
|
|
|
HBK05 JMCB-2003 Mounting Bracket Kit (only) for most Kawasaki Cruisers
|
|
HBK05C JMCB-2003 Mounting Bracket Kit (only) for ‘08 Kawasaki Concours14
|
|
|
|
|
|
|
JMCB-2003 Mounting Bracket Kit (only) for most Kawasaki Cruisers
|
JMCB-2003 Mounting Bracket Kit (only) for ‘08 Kawasaki Concours14
|
|
|
