|
5005 Driving Lights for Electra Glide, Street Glide & Road King
|
|
5007 Driving Lights for Road Glide
|
List Price: $399.99
Our Price: $359.99
You save $40.00!
|
|
|
List Price: $399.99
Our Price: $359.99
You save $40.00!
|
|
|
|
|
|
See your ride in a whole new light. This aggressively styled halogen driving light kit gives the traditional "batwing" fairing an entirely new personality. Compact, stretched bezels and stylized fully adjustable brackets provide a clean, stiletto sharp look with intense, focused light output. The H3 bulb puts out a serious beam of light with lots of options. The complete kit includes everything needed to bolt them on and plug them in.
Fits:'97-'09 FLHT, FLHTC, FLHTCU, '04-'05 FLHTCSE, '06-'09 FLHTCUSE, '06-'09 FLHX, '97-'09 FLHR, '98-'09 FLHRC, '04-'07 FLHRS, '07-'08 FLHRSE
Note:Installation does not interfere with removal or installation of stock detachable windshield on Road King models.
|
Now Road Guide owners can enjoy the darkness-melting power and sleek styling of Küryakyn Driving Lights. This kit's unique bracket configuration allows placement of these compact lights in the same location as the stock turn signals and also permits full adjustment. Besides being tucked in neatly right next to the fairing, even the wiring is neatly concealed - Just plug and play!
Fits:'98-'09 Road Glides
|
|
|
|
5021 Super Lizard™ Maximus Kit
|
|
5008 Fork Mounted Driving Lights
|
List Price: $329.99
Our Price: $296.99
You save $33.00!
|
|
|
List Price: $299.99
Our Price: $269.99
You save $30.00!
|
|
|
|
|
|
Everything you need to light up your bike! We’ve made it easy to mount & wire these lights with simple plug-&-play installation. Includes eight seven-color Super Lizard Lights, controller, “Y” connectors, double male connectors, double female connectors, 9” extensions, 12” extensions & 18” extensions.
Note: Contains 8 Lights & Controller
Tech Tip:When installing Lizard Lights, always make sure the wires are lined up with wire colors matching (red across from red). Always test the layout before installing. This can save time & potential aggravation. It is also important to remember the maximum load on one switch is 16 lights.
|
Here’s a slick way to add auxiliary lighting to the front of your bike! Our sturdy investment cast brackets mount securely to the front fender bosses on your lower legs & neatly mount our sleek 3” diameter driving lights. The mounts allow for easy vertical & horizontal adjustment to direct additional light exactly where you want it. The lights use standard, readily available 35 watt H-3 Bulbs so finding replacements or upgrades is no problem. Includes complete wiring harness.
Fits:’80-’09 Electra Glides, Tour Glides, Road Glides, Street Glides & Road Kings
|
|
|
|
LRHD-FS50 LED Light Rings for J&M® Fairing Speakers 1998-2011 Harley® StreetGlide/Ultra/RoadGlide
|
|
5022 Super Lizard™ Starter Kit
|
List Price: $249.99
Our Price: $239.99
Sale Price: $212.99
You save $37.00!
|
|
|
List Price: $176.99
Our Price: $159.99
You save $17.00!
|
|
|
|
|
Give your Harley fairing dash panel the ultimate custom look with J&M’s new multicolored fairing speaker LED light rings. They have been designed to be used with the J&M brand speakers with grill mounted midrange and/or tweeter, on the 1998-2011 Harley® StreetGlide/Ultra/RoadGlide/ElectraGlide fairing.
These LED light rings are made with top-quality high-intensity LEDs, mounted on high-strength PCB board material, with total reverse-polarity/over-voltage protection as part of their design and are completely sealed for absolute moisture resistance to provide many years of service. Featured LED colors are Red, Blue, Green, Orange, and Amber and they are controlled by individual PCB mounted DIP switches to allow you to turn on one color at a time or a combination of colors, to help match to the color of your dash mounted gauges and/or radio lights.
Installation is a snap as these LED light rings simply sandwich between the J&M speaker grill and the plastic adapter/spacer ring that the speaker mounts to, during installation. The LED light ring power/ground wiring harness is made to plug into the back of the cigarette lighter socket, for a simple and easy plug-n-play installation.
Kit includes 2 LED light rings, power/ground wiring harness and complete installation/operation instructions.
|
Want to light up your bike without the big price? This kit comes with all the pieces needed to light up your ride. Includes four seven-color, (select from red, lime, ice blue, sky blue, dark blue, purple or green, or hues fading continuously from one to the next) Super Lizard Lights, one controller, one 9” extension & one 12” extension.
Note:Contains 4 Lights & 1 Controller
Tech Tip:When installing Lizard Lights, always make sure the wires are lined up with wire colors matching (red across from red). Always test the layout before installing. This can save time & potential aggravation. It is also important to remember the maximum load on one switch is 16 lights.
|
|
|
|
1616-2391 Silver Bullet with Saddle Mounts
|
|
5023 Super Lizard™ Expansion Kit
|
List Price: $155.99
Our Price: $140.99
You save $15.00!
|
|
|
List Price: $88.99
Our Price: $79.99
You save $9.00!
|
|
|
|
|
|
These Reflector style L.E.D. Silver Bullets replace stock front turn signals on Dressers, Road Kings, and Heritage Models. They operate as both running lights and turn signals.
Fits:'83-'09 Electra Glides (except '04-'05 FLHTCSE, '06-'09 FLHTCUSE), '98-'03 Road Glide, '88-'96 Tour Glides, '94-'09 Road Kings (except '04-'07 FLHRS, '07-'08 FLHRSE), '86-'09 Heritage/Heritage Classic, '93-'96 FLSTN, '10 FLSTC Heritage Softail Classic
|
Not enough glow on your bike? Add this expansion kit that simply plugs into your existing Super Lizard set-up for a little extra light. Includes two seven-color Super Lizard Lights, “Y” connectors, double male connectors, double female connectors & 12” extensions.
Note:Does not include Controller
Tech Tip:When installing Lizard Lights, always make sure the wires are lined up with wire colors matching (red across from red). Always test the layout before installing. This can save time & potential aggravation. It is also important to remember the maximum load on one switch is 16 lights.
|
|
|
|
4859 - Rear Run-Turn-Brake Controller with pulse brake capability (Each)
|
|
|
List Price: $79.99
Our Price: $71.99
You save $8.00!
|
|
|
|
|
A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights! It can be used with our L.E.D. or Halogen Silver Bullets, our incandescent Fender Strut Lights, stock turn signals, or any single filament light you may already have installed on the rear of your bike. Completely plug-in for most ’96-newer Harley-Davidsons® with single filament turn signals and a taillight with running and brake functions. Compatible with ’02-later H-D factory cruise control. Direct plug-in for: ’96-’08 Softails; ’97-’08 Dynas, Dressers, Road Kings; and ’99-’03 Sportsters. For installation on earlier models or '04-'08 Sportsters see 8-Pin Hardwire, or 6-Pin to 8-Pin Adapters listed in the Specialty Lighting section.
Important: P/N 4859 is not compatible with aftermarket or accessory modules that alter the functions of the stock taillight and turn signals. If you have already made modifications to your bikes taillight and/or turn signals, you will have to return your bike to stock form before installing our Controller. Bikes equipped with factory security system and low-draw L.E.D. lights also require P/N 4857 - Alarm Compatible Load Equalizer.
|
|
|
